Ideal Motion is a leading supplier of 190RBI inclined roller bed conveyor. 190RBI inclined roller bed conveyor is ideally suited for the following applications: Booster conveyor for gravity flow systems, Transporting between floors, Center drive, Conveys heavier loads due to less friction.
Standard Specifications:
Belt - 12", 16", 18", 20", 24" and 30" wide rough-top belt. Bed - Roller bed with 1.9" diameter x 16 gauge galvanized rollers spaced on 6" centers. Rollers mounted in 7" x 1-1/2" x 12 gauge powder painted formed steel channel frames. Frames bolted together with butt couplings. Under-Trussed Bed - Extra reinforcement to prevent sag in longer bed sections in addition to reinforcing angles, 20 feet and longer. X-Bracing - Supplied on conveyors 40 feet and longer. Used to square bed sections to insure proper product and belt tracking. Double Nose-Over - Adjustable from 0° to 30°. Center Drive - Mounted below conveyor bed section. Can be placed most anywhere in conveyor length. Tail Pulley - 4" diameter, crowned with 1-3/16" diameter shaft through 30" wide belt. 6" diameter tail pulley with 1-7/16" diameter shaft turned down on ends for wider than 30" belt. Drive Pulley - 8" diameter and fully lagged, 1-7/16" diameter shaft. Snub Roller - 2-1/2" diameter at drive pulley, 2" diameter at terminal pulleys. Return Roller - 1.9" diameter. Take-Up - Located in center drive, provides 24" of belt take-up. Gravity Brackets - Adjustable rod with 1-3/8" diameter pop-out transfer roller to attach wheel or 1-3/8" diameter roller conveyor. Bearings - Sealed prelubricated with cast iron housings. Floor Supports - Adjustable 31-1/2" to 45-1/2" from floor to top of belt. One support supplied at each end of conveyor and at nose over, with knee braces. Speed Reducer - C-Face mounted heavy duty worm gear reducer. Motor - 3/4 HP 230/460-3-60 TE motor. Belt Speed - 60 FPM constant.
190RBI - Inclined Roller Bed Conveyor
Copyright © 2007 Ideal Motion, LLC. All rights reserved..
legal I privacy
