Ideal Motion is a leading supplier of shaft driven live roller right angle and bi-directional transfer conveyor. Shaft driven live roller right angle and bi-directional transfer conveyor is ideally suited for the following applications: Transfers.

 Standard Specifications:

Shaft Driven Live Roller conveyor is available in various configurations to support numerous system applications. It is quiet, safe, and offers high speed and reversibility. It can power curves, straights, and other accessories such as trans- fers, junctions, and merges with a single drive. It is ideally suited when diverse live roller applications are required in a small area. Shaft Driven Live Roller Conveyor reduces overall system cost while enhancing system capabilities and flexibility. Costs are reduced because transferring, merging, diverting, and accumulating beds can all be powered by a single drive. The driveshaft, common to each of the shaft driven beds, is easily coupled to the next downstream conveyor bed. This flexibility allows your system to grow and adapt as your needs change. The internalized drive shaft makes the conveyor beds forklift friendly when installation at higher elevations. Right Angle Transfers can transfer product in only one direction. It can transfer to a conveyor that is parallel or perpendicular to the transferring conveyor. When transferring to a conveyor that is perpendicular to the transferring conveyor the product orientation will be changed by 90 degrees. Bi-directional Transfers can transfer product in either direction and automatically includes an internal crossover.

Bed Section: 16” Deep x 1 3/8” Flange x 12 Gauge frame. Galvanized Rollers: 1 7/8” Diameter 16 Gauge, carrying roller with 7/16” hex axle. Drive Shaft: 1” diameter cold rolled shaft with speed-up spools pinned to the shaft and 3/16” dia. 83 durometer elastomeric drive belts. Sort Rate Capacity: Up to 20 Cartons Per Minute dependant upon carton size & weight and system design. Carton Weight Capacity: Up to 90 pounds, depending on line shaft conveyor speed. Transfer Belt: 3/8” dia. 83 durometer polyurethane.

Typical Applications: Transfer, Carrying Roller Centers:  3” Live Load Capacity: Transfer Belt Extensions: Up to 20 lbs. per roller. 0”, 2 1/2”, or 5 1/2” Standard Nominal Widths: Options: 18”, 24”, 30”, & 36” Guard Rail & Supports Between Rail Widths: Hi-Speed Rollers Four or Five Transfer Belts 16”, 22”, 28” & 34” Crossover (Standard in Bi-Directional) Single Solenoid Device Control Powder Coat or Galvanized Finish

Shaft Driven Live Roller Right Angle and Bi-Directional Transfer Conveyor