Ideal Motion is a leading supplier of AutoRoll accumulation motorized roller curve conveyor. AutoRoll accumulation motorized roller curve conveyor is ideally suited for the following applications: Transportation & Accumulation.
Standard Specifications:
The AutoRoll™ Motorized Roller (AR) conveyor is available in various configurations to support numerous system applications. It is quiet, safe, requires low-to-no maintenance, and offers high speed and non-contact zero pressure accumulation. Level conveyor, inclines, declines, curves and sweeps can all accumulate product without bumping, getting side-by-side, skewing or jamming. Intermixed products, such as totes, slave pallets and cartons can be handled simultaneously even when there are extreme differences in weights from one product to the next. AutoRoll™ conveyor features run-on-demand zones. It only runs when required to advance product, there- by reducing energy consumption and overall noise generation as well as extending the functional life of the conveyor. When comparing actual power consumption of two (2) like systems with same or similar throughputs, AutoRoll™ consumed only 30% of what a comparable 460 Volt 3 Phase system would consume. This can represent a significant savings that is often not considered. AutoRoll™ conveyor has an extremely quiet OSHA approved sound level. As an added consideration, because AutoRoll™ is run-on-demand, there is no sound generated when the zones are in accumulation mode, or when product is not present.
Bed Section: Rollers Low In Frame: 7 1/2” Deep x 1 1/2” Flange x 12 Gauge frame with 29 3/4” inside radius. Includes side covers. Rollers: Tapered Carrying: 1 7/8” Diameter, 16 Gauge, carrying roller with 7/16” hex axle and plastic tapered sleeves. Drive Rollers: (1) ITOH 24VDC Brushless Motor Driven Roller per accumulation zone. Includes wire harness, accumulation card and motor control card. Sensor: Side-mounted 24VDC polarized retro-reflective photo-eye. Axle Isolators: Specially designed, patented conductive plastic insert isolates carrying roller axles from the conveyor frame to reduce noise and prevent wear. Finish: Conductive powder coated paint to prevent static charge build-up.
Typical Applications: Transportation & Accumulation Standard Nominal Widths: 18”, 24”, 30”, & 36” Live Load Capacity: 75 lbs. per carton Standard Curve Offering: 30o,45o, 60o, and 90o Between Rail Widths: 15 1/2”, 21 1/2”, 25 1/2” & 31 1/2” Carrying Roller Centers: 2” & 3” Standard Junction Offering: 30o and 90o Options: Guard Rail & Supports Hi-Speed Rollers Punch for Top Mount Guardrail.
AR - AutoRoll Accumulation Motorized Roller Curve Conveyor
Copyright © 2007 Ideal Motion, LLC. All rights reserved..
legal I privacy
