 |
|
|
|
|
|
Ideal Motion is a leading supplier of optional
power feeders for incline conveyors. optional power feeders for incline
conveyors are ideally suited for the following
applications: Accumulation of light boxes, totes, bins, baskets.
Minimum back pressure. |
|
|
Standard Specifications:
Driving Belt - 8" wide for 15" and 21" between frames, 12" wide for 27" between frames, 16" wide for 33" and 39" between frames; black PVC 120 belt.
Bed - Roller bed width between frames, 15", 21", 27", 33", and 39". 7" x 1-1/2" x 12 gauge powder painted formed steel channel frame, bolted together with butt couplings and floor supports.
Tread Rollers - 1.9" diameter x 16 gauge galvanized steel rollers spaced on 2-1/4", 3", 4-1/2", or 6" centers. Safety pop-out design prevents damage to product or harm to personnel if caught between belt and tread rollers.
Pressure Rollers- 1.9" diameter x 16 gauge galvanized steel rollers spaced on 6", 9", or 12" centers, cam adjusted.
X-Bracing - Frame Squaring device supplied on conveyors 40 feet and longer on every other bed section. X-bracing insures good product and belt tracking.
Tail Pulley - 4" diameter crowned with 1-3/16" shaft.
Drive Pulley - 8" diameter crowned and fully lagged with 1-7/16" diameter shaft.
Snub Roller - 2-1/2" diameter adjustable, located directly behind drive pulley. 2" diameter at each end directly behind terminal pulleys
Return Idlers - 1.9" diameter adjustable on 10'0" centers.
Floor Supports - 31-1/2" to 45-1/2" adjustable from floor to top of rollers. One support supplied at each end of conveyor and at each bed joint.
Take-Up - Located in center drive, provides 24" of belt take-up.
Bearings - Sealed and pre-lubricated with cast iron housings.
Speed Reducer - C-Face mounted heavy duty worm gear reducer.
Motor - 1/2 HP 230/460-3-60 TE motor.
Belt Speed - 60 FPM constant.
Capacity - 150 pounds per foot. Not to exceed Load Capacity Chart |
Optional Power Feeder |
|
|
|
Top of Page |
|
|
|
|
 |
 |
|